top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

How MCS varies for each transmission? What factors taken into consideration for deciding MCS?

+3 votes
398 views

Let suppose, for initial transmission MCS=28, this transmission got nack.... for retransmission what should be MCS 27 or something else ???? If retransmission_1 also nacked, what will be next MCS ?

posted Aug 26, 2016 by Suchakravarthi Sripathi
Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

Hi sripathi,

As soon as Enode recieve CQI report from UE , It will apply MCS in further transmission. Till that point it is EnodeB Scheduler implemtationto select MCS. But in most case while attach procedure itself ENodeb will configure CQI periodicity to recieve CQI and whenever datat flow starts ENodeb will apply.
Cqi range from 0 to 15, there is corresponding MCS mapping is there in Physical layer SPEC.

answer Aug 29, 2016 by Jaganathan
HI jaganathan, yes i agree with your explanation. But i want to know how MCS value varies for each transmission (if first value is 28 .... for next retransmission can i select 27 ) or any other parameters should consider?
It is implmentation specific, ENB can select in any way but standard scheduler implementation is scheduler will adjust only when CQI changes , IF retrasnmission means scheduler will play only with RV. Because IF you change the CQI at retx time then You need more RB's than original transmission Rb's, so most of the scheduler avoid's it. but if really CQI reoort is less than original then it can adjust.
if some data transmitted and its not decoded successfully, so we have to decrease no of bits transmitting in a symbol (MCS) and retransmit that data .... if we not decrease the MCS, How can we assure data will be reached properly in next transmission?
Hi sripathi,

It is not mandatory that we should reduce the MCS, When you do retx based on CQI reoport you can adjust, even CQI to MCS mapping you should not change frequently, say examble user is moving so he will frequently send different CQI but at ENB side we should have some mechanism that average of all cqi er should consider, so likewise when doing retx user may comes to good channel quality area so instead of going and reducing blindly mcs enb should have intelligence to tx it.

Your answer

Preview

Privacy: Your email address will only be used for sending these notifications.
Anti-spam verification:
To avoid this verification in future, please log in or register.
Similar Questions
+1 vote

We can map the SIBs onto the same SI under the following constrains:

The SIBs which are mapped onto the same SI, must have the same transmission period; My question is , how do I check the transmission period for each SIB?

Is it standard for each SIBs i.e. SIB1 = 80 ms , SIB3=120ms , SIB4=240ms?

+1 vote

I have observing MCS_1 = 27 and MCS_2 = 27 in DCI_PDU .. But MCS_1 = 6 and MCS_2 = 6 in DLSCH_PDU ? How these relating to each other?

As i understood MCS_1 and MCS_2 in DL_DCI should reflect same in DLSCH_PDU also. But here these are different. Is my understanding is wrong or any decoding issues ? please help

+2 votes

For FDD 20MHZ, no of DL RB = 100 and no of UL RB = 100. But in TDD, different UD configurations having different no of DL and UL subframes and few special subframes. Hence how to calculate no of Dl RB and no of UL RB in case of TDD?

...