top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

QCI1 attempt in LTE at a particular sector

+2 votes
261 views

Can some tell me what i need to check if there is no QCI1 attempt at a particular sector.

posted Mar 8, 2018 by anonymous

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

QCI 1 is associated with voice data in LTE. If you are suspecting QCI 1 is not being established at a particular sector then I would suggest to verify following things:
- Towards network side
1. EPS network feature support field in attach accept message. This field contains various flags and one of the flags indicates "IMS over PS session in S1 mode" supported/un-supported.
2. If network supports IMS over PS session then UE can trigger IMS registration towards IMS network. IMS registration messages are transferred using QCI = 5 bearer which is a default bearer of IMS signalling. This bearer can be established as part of initial registration or as a separate PDN connectivity procedure.
3. Verify for successful execution of ERAB setup procedure for QCI 1. If it is not happening then eNodeB would be sending exact error code to network.
- Towards UE side
1. After SIP messages exchanged, verify for incoming RRC connection reconfiguration from eNodeB with NAS "Activate Dedicated EPS bearer context Request" message.

If VoLTE call is happening is other sector but not happening in few sectors then narrow down your debugging area at S1-AP interface messages such as E-RAB setup Request (for QCI 1) and UE logs after SIP registration.

answer Mar 10, 2018 by Harshita
Similar Questions
+2 votes
LTE: How an eNodeB come to know about CDMA2000 Sector ID while building the "UPLINK S1 CDMA2000 TUNNELING" message ?

Does UE inform to eNodeB in any RRC message ? Or eNodeB itself has static configuration ?

+3 votes
LTE handover: How would be handled this particular scenario under Forward handover ?

I have a use case for forward handover.

What will happen, when UE moves to target eNodeB through forward handover and target eNodeB is connected to a new MME.
I mean to ask what will happen with old session which is already maintained at MME, SGW and PGW. Definitely there is a loss of data packet since UE has already moved to some other eNodeB (target eNodeB) due to RLF.

When UE shal attach to new MME, MME shall send create session request to SGW, and SGW forward it to PGW.
Now question is that how PGW handle this situation, when it receives a new create session request from a new MME for an already existing session(via old mme).

...